Om Enterprise
Bakrol, Ahmedabad, Gujarat
GST No. 24ARVPP1128J1ZG
Call 08048950562 82% Response Rate
Send Enquiry
Pneumatic Stapler
TA116A 22-9 CE Air Stapler
Minimum Order Quantity: 100 Piece
| Air Pressure | 70 psi |
| Firing Mode | Automatic |
| Length | 237mm |
| Model Name/Number | TA116A/22-9 CE |
| Weight | 1kg |
| Capacity | 180 Staples |
| Height | 152mm |
| Width | 48mm |
| Air Consumption | 0.31 l (0.011ft3) at 6.9 bar (100p.s.i.) operating pressure |
| Brand | Max |
1. Wear Safety Glasses or Goggles
- Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.
- The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the Council Directive 89/686/EEC of 21 DEC. 1989 (American National Standards Institute, ANSI Z87.1) and provide both frontal and side protection.
- The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area
- NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.
Name of Parts
- Frame
- Cylinder Cap
- Air Exhaust Port
- Slider Unit
- Magazine
- Trigger
- Grip
- Click Lever
- Warning Label (back side)
- Outlet
Features
- Lightweight and Compact:-Ultra-lightweight at 2.2 lbs means no strain on the body from use.
- Protect Your Face From Exhaust Air:- Rear exhaust design deflects air from the user's face when the tool is in operation
- Comfortable Rubber Grip:-Protects hands from friction with the tool and provides slip resistant handling.
- Ergonomic Design:-Slim body to easily fit into tight spaces for more accurate application
- Efficient and Rapid Operations:-Rapid Fire trigger allows for high-speed application for increased efficiency
- Compatible With Standard Fasteners:-Uses same fine wire staples as 71 Series
View Complete details
TA116A 21-13 CE Air Stapler
Minimum Order Quantity: 100 Unit
| Brand | Max |
| Weight | 1kg |
| Model Name/Number | TA116A/21-13 CE |
| Air Pressure | 100 psi |
| Length | 237mm |
| Width | 48mm |
| Height | 152mm |
| Capacity | 150 Staples |
1. Wear Safety Glasses or Goggles
- Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.
- The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the Council Directive 89/686/EEC of 21 DEC. 1989 (American National Standards Institute, ANSI Z87.1) and provide both frontal and side protection.
- The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area
- NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.
Name of Parts
- Frame
- Cylinder Cap
- Air Exhaust Port
- Slider Unit
- Magazine
- Trigger
- Grip
- Click Lever
- Warning Label (back side)
- Outlet
Features
- Lightweight and Compact:-Ultra-lightweight at 2.2 lbs means no strain on the body from use.
- Protect Your Face From Exhaust Air:-Rear exhaust design deflects air and fumes from the user's face when the tool is in operation.
- Comfortable Rubber Grip:-Protects hands from friction with the tool and provides slip resistant handling.
- Handy Construction:-Slim body to easily fit into tight spaces for more accurate application
- Efficient and Rapid Operations:-Rapid Fire trigger allows for high-speed application for increased efficiency.
- Compatible With Standard Fasteners:-Uses same fine wire staples as 80 Series.
View Complete details
TA551A/16-11 Pneumatic Crown Stapler
Minimum Order Quantity: 100 Unit
Product Brochure
| Warranty | 1 year |
| Brand | Max |
| Weight | 2.2 kg |
| Model Name/Number | TA551A/16-11 |
| Capacity | 157 Staples |
| Height | 288.5 mm |
| Width | 84 mm |
| Length | 356 mm |
| Air Consumption | 0.039 ft3 (1.1R) at 100 p.s.i. (7 bar) operating pressure |
| Recommended Operating Pressure | 70 to 100 p.s.i. (5 to 7 bar) |
TA551A/16-11 Pneumatic Crown Stapler
1. Wear Safety Glasses or Goggles
Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.
The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 (Council Directive 89/686/EEC of 21 DEC. 1989) and provide both frontal and side protection.
The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area.
NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.
Additional Information:
- Item Code: TA-551-1638T
View Complete details
Pneumatic Industrial Stapler
Minimum Order Quantity: 100 Piece
| Air Pressure (psi) | 70 psi |
| Warranty | 1 year |
| Gauge | 16 gauge |
| Stapling Capacity | 157 pins |
| Air Inlet | 1/4" |
| Firing Mode | Sequential |
View Complete details
EXPLORE MORE CATEGORIES