Om Enterprise
Om Enterprise
Bakrol, Ahmedabad, Gujarat
GST No. 24ARVPP1128J1ZG
Send E-mail
Call 0804895056287% Response Rate
Home  » Our Products » 

Fine Wire And Crown Stapler


Our range of products include ta116a 21-13 ce fine wire stapler, ta551a/16-11 pneumatic crown stapler and ta116a 22-9 ce fine wire stapler.

Get Best Quote

Approx. 6,000 / Unit Get Latest Price

Product Brochure
Product Details:
Model Name/NumberTA116A/21-13 CE
BrandMax
Weight1kg
Air Consumption0.34 l (0.012ft3) at 6.9 bar (100p.s.i.) operating pressure
Capacity150 Staples
Height152mm
Width48mm
Length237mm
Recommended Operating Pressure5 to 6.9bar (70 to 100p.s.i)

Safety Instructions 
1. Wear Safety Glasses or Goggles
  • Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.
  • The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the Council Directive 89/686/EEC of 21 DEC. 1989 (American National Standards Institute, ANSI Z87.1) and provide both frontal and side protection.
  • The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area
  • NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.

 Name of Parts
  • Frame
  • Cylinder Cap
  • Air Exhaust Port
  • Slider Unit
  • Magazine
  • Trigger
  • Grip
  • Click Lever
  • Warning Label (back side)
  • Outlet

Features
  • Lightweight and Compact:-Ultra-lightweight at 2.2 lbs means no strain on the body from use.
  • Protect Your Face From Exhaust Air:-Rear exhaust design deflects air and fumes from the user's face when the tool is in operation.
  • Comfortable Rubber Grip:-Protects hands from friction with the tool and provides slip resistant handling.
  • Handy Construction:-Slim body to easily fit into tight spaces for more accurate application
  • Efficient and Rapid Operations:-Rapid Fire trigger allows for high-speed application for increased efficiency.
  • Compatible With Standard Fasteners:-Uses same fine wire staples as 80 Series.

Yes! I am interested


Get Best Quote

Approx. 25,000 / Unit Get Latest Price

Product Brochure
Product Details:
Model Name/NumberTA551A/16-11
BrandMax
Warranty1 year
Weight2.2 kg
Air Consumption0.039 ft3 (1.1R) at 100 p.s.i. (7 bar) operating pressure
Capacity157 Staples
Height288.5 mm
Width84 mm
Length356 mm
Recommended Operating Pressure70 to 100 p.s.i. (5 to 7 bar)

1. Wear Safety Glasses or Goggles

Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.

The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the American National Standards Institute, ANSI Z87.1 (Council Directive 89/686/EEC of 21 DEC. 1989) and provide both frontal and side protection.

The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area.

NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.



Additional Information:
  • Item Code: TA-551-1638T

Yes! I am interested


Get Best Quote

Approx. 6,500 / Unit Get Latest Price

Product Brochure
Product Details:
Height152mm
Width48mm
Length237mm
Weight1kg
Recommended Operating Pressure5 to 6.9bar (70 to 100p.s.i)
Capacity180 Staples
Air Consumption0.31 l (0.011ft3) at 6.9 bar (100p.s.i.) operating pressure
BrandMax
Model Name/NumberTA116A/22-9 CE

Safety Instructions 
1. Wear Safety Glasses or Goggles
  • Danger to the eyes always exists due to the possibility of dust being blown up by the exhausted air or of a fastener flying up due to the improper handling of the tool. For these reasons, safety glasses or goggles shall always be worn when operating the tool.
  • The employer and/or user must ensure that proper eye protection is worn. Eye protection equipment must conform to the requirements of the Council Directive 89/686/EEC of 21 DEC. 1989 (American National Standards Institute, ANSI Z87.1) and provide both frontal and side protection.
  • The employer is responsible to enforce the use of eye protection equipment by the tool operator and all other personnel in the work area
  • NOTE: Non-side shielded spectacles and face shields alone do not provide adequate protection.

 Name of Parts
  • Frame
  • Cylinder Cap
  • Air Exhaust Port
  • Slider Unit
  • Magazine
  • Trigger
  • Grip
  • Click Lever
  • Warning Label (back side)
  • Outlet

Features
  • Lightweight and Compact:-Ultra-lightweight at 2.2 lbs means no strain on the body from use.
  • Protect Your Face From Exhaust Air:- Rear exhaust design deflects air from the user's face when the tool is in operation
  • Comfortable Rubber Grip:-Protects hands from friction with the tool and provides slip resistant handling.
  • Ergonomic Design:-Slim body to easily fit into tight spaces for more accurate application
  • Efficient and Rapid Operations:-Rapid Fire trigger allows for high-speed application for increased efficiency
  • Compatible With Standard Fasteners:-Uses same fine wire staples as 71 Series

Yes! I am interested


 

Explore More Products
 

 

Send SMS
Hetalbhai Patel  (CEO)
Om Enterprise
Plot No 95 & 96, Sahitya Industrial Hub, Marga Farm Road, Behind Om Industrial Park
Bakrol, Ahmedabad - 382415 , Gujarat , India
Send E-mail
Share Us:
X